How to apply liquid, solid, warm, and cold wax on the car

Wax for cars forms a special protective film on the surface which can protect the body from minor scratches. Deserves special attention restoration effect, which have substances of this type. They are able to disguise the defects.

Another important property of high-quality wax for a car is to prevent the growth of defective areas. If the protective layer is applied on the damaged area, it prevents various substances, which can worsen the situation.

cold wax for car
Important! Wax for cars is hindered by the damage the surface of the machine may receive from a variety of chemicals, water and salt.

Not to mention another important property of this substance. It's not allowing corrosion to eat away at the body of the vehicle. A nice bonus is the UV protection.

If to speak about purely visual component, then wax for a car gives the car that Shine that you saw in the showroom when I bought it. Quality substance which may make your machine new again. But it is necessary to correctly apply the tool to the surface to carry out polishing.

If the car is waxed, water runs down much faster. This allows to avoid the formation of stains, which can often be seen on the hood or roof after rain. In addition, the coverage of this kind allows much less to get the car washed.

What kinds of wax there are

Depending on the properties

The automotive industry is constantly evolving. As a result, every year there are more tools that allow you to effectively take care of the vehicle. At the moment it is possible to allocate such types of wax depending on its properties:

  • spray
  • liquid,
  • a solid mass,
  • synthetic.

Among the professional car assumed that spray is one of the least functional types. The fact that he is very sensitive to various external influences.

Attention! Just a couple of washes and waxes for a car in the form of a spray will wash away.

Despite this, the car wax in spray form has one distinct advantage — its very simple and fast to apply. Therefore, if you urgently need to bring the car in order is ideal.

Liquid wax for cars has a lot more resistance to external influences. But its application requires more time and effort. Fortunately, the process itself is quite simple. You only need to wash the car, apply the product and carefully RUB it.

Hard wax, in contrast to the two previous types can be applied on dry surfaces. So after the car is washed, you will have to wait until it dries. Of course, to speed up the process you can use construction dryer, but such a device is not at all.

Attention! The main advantage of solid wax for cars is that it is able to survive for about 6 months.
cold wax for car pros

It is believed that the solid wax has the greatest resistance to various external influences. It is quite common to see the composition of the expensive car shampoos. There are also separate funds in liquid form.

Depending on the origin

Wax for cars can be classified according to the substances that formed the basis of it. Now there are the following types:

  • synthetically,
  • mineral,
  • vegetable
  • animals.

This feature is less often taken into account when selecting the wax for processing of the car. The fact that its effect on the quality parameters is minimal.

Depending on the method of application

Classify wax for cars can also be by way of application:

  • cold
  • Penn,
  • hot.

Cold wax for cars is a liquid which contains the emulsion of the cationic substances and additives. The coverage of this class can make every car owner.

The main drawback — fragility.

Hot wax for a car can be both natural and synthetic origin. It begins to melt when the temperature exceeds 90 degrees Celsius. This substance is considered the highest quality among all types in this classification. It is able to maintain its performance throughout the year when you purchased the product good manufacturer.

Attention! Most substances with a hot method of application are based on corrosion inhibitors.

To apply the hot wax will require water of suitable temperature. After the substance to be divorced, with a sponge polishing is done. The main drawback of this kind is the high cost.

A foam wax to a car in their qualitative characteristics are the closest to hot. However, if we take into account the application of the technology, they are totally different.

The fact that the foam wax can be applied to the car surface without using special equipment. It is responsible for the creation of an emulsion with foam. For this to become a reality, the air drops into the water-wax mixture.

The use of this method of application ensures long-term explication of the coating. This effect can be achieved through the use of additional equipment. It provides the most uniform distribution of a substance on the surface.

The subtleties of application

Apply hard wax

Hard wax has many advantages. It ensures reliable protection of the car for a long time. But it became a reality during the application need to adhere to this sequence of actions:

  1. Wash the car. On the surface there should not be insects, tar stains and other dirt.
  2. Close all doors in the room. On the body should not be exposed to dust or dirt.
  3. Dry the vehicle. For application, use a dry sponge. If no sponge, fit a simple piece of soft cloth.
  4. Apply the substance on the car evenly.
  5. Means you need to grind evenly on the surface.
  6. Wait until the protective layer has dried. To form a matte coating.
  7. Wipe off any excess.
  8. Take a piece of soft cloth and Polish the surface to Shine.

The cars need to handle in parts. This ensures that it is a protective layer that will give your car a second life and help to hide small defects. But to get a lasting effect you need to use a quality tool. You should also follow some precautions:

  1. Need not apply the product in extremely hot or cold weather. The limit +6. Humidity should also be within normal limits.
  2. Never use a rough sponge.
  3. Avoid a pronounced transition between the polished areas.

Just three simple guidelines will allow you to avoid the mistakes that all beginners make. You should also remember that the lifetime of the protective layer largely depends on how often you wash the car and climate.

Apply liquid wax

For application of this substance on the car need to be washed. Immediately after this, it is desirable to flare the body with warm air. Ideally, this task will help to manage a building dryer. If not, you can just wait until the car dries a bit.

Attention! Cars do not need to wipe dry.

Liquid wax is diluted in warm water. The proportion depends on the funds that you have purchased. Spray evenly around the body. Try not to miss sites. This will allow to create the most balanced protection.

Once the substance is sprayed you need to wait a few minutes. Then you have doused the car with water. This will help to get rid of the excess. Only now you can start polishing the car. This procedure will give the surface Shine and greatly improve the appearance of the vehicle.

Attention! Before polishing the body needs flare warm air.

With proper skill, the whole procedure takes about 20 minutes. Beginner for the application of substance and polishing may need slightly more, about 40 min. In any case, the process is not particularly difficult. So it can handle everyone.

Apply hot wax

Begin applying hot wax on the car with the choice of a suitable tool. For this you need to pay attention to the label. It will be written for cars what color is suitable liquid.

Attention! Before starting the process, prepare the cloth.

The car needs to wash and dry. All work must be performed in a well ventilated area. Thus the surface should not fall in direct sunlight.

The wax diluted in hot water, then the sponge is applied to the vehicle. After this, polishing is carried out. As you can see, nothing complicated, this process is not represented.

Tip! A similar treatment is recommended in late autumn.

Apply cold wax

Still have to apply wax on the car after each wash. Fortunately, it is not particularly difficult. All you have to do is spray. Once you spray the liquid on the body of the car remains should be washed with water.

Attention! Cold wax has a relatively low cost and allows you to quickly handle the car.

Results

If desired, the car can apply any type of wax. Only for one species requires special equipment in the form of a blower. The most persistent is considered a hard wax. The most available cold.