How to cover the machine the liquid in the glass with the hands

how to apply liquid glass in the auto

After the purchase of a new car, each one to his owner wants, as much as possible, keep the brightness and splendor of the retouching. Unfortunately, the weather and the traffic conditions in our country is far short of the ideal, the car is not fast enough loses its first gloss and respectability, covered the lower risk. This not only robs the machine of the brightness, but also contributes to the corrosion of the body, once coupled with the brightness, the factory paint loses part of its protective properties. The smaller particles of sand and gravel daily, acting floor, literally acting as a nest, without removing the layer-by-layer, and the reagents, which are abundant are processed motorway are a kind of catalyst, accelerating the process of formation of corrosion. Resistant to washing also does not contribute to the preservation of the integrity of the coating. In this respect, desire a very natural driver is the coating machine of various protective polishing. Not too long ago, emerged in the domestic market of liquid glass for auto, today, can be considered one of the most efficient methods of protection, and polishing of auto liquid glass-traveler has the most enthusiastic.

GLASS OF WATER - INNOVATIVE TECHNOLOGIES FOR THE PROTECTION OF THE BODY

Unlike such common methods of protection, such as the application of different glazes usually contain wax, processing of auto liquid glass helps protect the paint is much more efficient.

GLASS OF WATER – INNOVATIVE TECHNOLOGIES FOR THE PROTECTION OF THE BODY

For the first time, used the liquid glass to auto Japan. It was even in 2008. The composition of such enamels includes silicon dioxide and silicate connection, allows the application not only on the body of the car, but and the glass. This will help to avoid that the divorce rate in the glass, but at the time of a small rain will be the possibility not to include the windshield wipers during the movement. The shield liquid glass for auto, please do not just instantly removes scratches and small scratches, but also makes the color in the painting, more profound and more rich. Resistant to stains the net effect of the glass is manifested in the fact that the flying under the wheels of dirt is practically not absorbed by the cover and easily washable, even with the help of a bottle of water.

Coating machine liquid glass, according to the opinions of owners of vehicles, which allows to reach the very impressive advantages, in comparison with other types of protection:

  • created the film has a high resistance and holding the back of one to 1.5 years;
  • the painting does not fade and does not lose the shine, does not fade under the constant exposure to UV rays;
  • is assured perfect protection against small scratches and chips;
  • the effect of metal on the body will no longer accumulate static electricity;
  • the increase of the resistance of the film of liquid glass to the chemically active substances;
  • the possibility to apply floor self liquid to the glass, and opinions say that it is not so complicated.
The tip!Use the protection of liquid glass best immediately after the acquisition of the auto, if the machine has already been operated, the preparation for the processing of this Polish should be carried out in specialist services.

THE PREPARATION OF THE CAR TO THE SELF-DAMAGE TO THE POWER NET

THE PREPARATION OF THE CAR TO THE SELF-DAMAGE TO THE POWER NET

Before you apply liquid glass to auto, with the hands, it is necessary to carefully prepare all of the faces worked. In this procedure, you even need a new car, how is insignificant and the distance travelled, for the paint coating appeared resistant to pollution, fractures, capillaries, accumulate the dirt and oils obtained from bituminous stains and traces of insects - all this is necessary to completely remove the surface of the self. In addition, before covering the machine liquid for glass, according to the feedback experienced drivers, it's worth doing all chipped and the occurrence of scratches in the paint coating.

For a start, you should wash the entire car, with the application of special shampoo. To do this, you must use the pressure washer. This will remove the paint basic, the visible part of the pollution. After that, it is recommended to treat self special abrasive mass, through which are excluded from the smaller dirt particles accumulated in the microcracks, such as liquid glass to self, through the opinions of owners, its simply "seal", but does not hide.

Special attention should be given to the patches of bitumen, and the pursuit of insects - to get rid of them, you can use special cleaning.

After that, you should lubricate the surfaces using solutions based on alcohol. You can't use to do this, the solvents, since the effect is exactly the opposite. In the final step, the car freshly washed under high pressure, but without the use of any type of chemical, only clean with water, and wiped dry with a clean cloth. Now, it may be applied with liquid glass on the machine.

Important!All work shall be conducted indoors, in the absence of air currents, direct sunlight and flows. The vehicle must be cold.

THE APPLICATION OF LIQUID GLASS WITH THE HANDS

THE APPLICATION OF LIQUID GLASS WITH THE HANDS

After the execution of all the necessary procedures of cleaning, you can start applying a liquid glass on the car. For your own use, you may recommend the liquid glass to self wilson. Boasting quite acceptable cost, it is of high quality, sold in bottles of 300 ml, which will be enough for 5-6 coats (on average, a machine quite 50 ml). It's not worth committing a common mistake, trying to cover the whole car immediately and quickly, it is best to apply Polish in every detail (bumper, fenders, hood), alternately. This will create a uniform coating.

Complete with Polish will sponge to apply, and special (often colored), and cloth, microfiber - they are designed for alignment composition. Liquid glass for auto-applied according to the instructions for use, and only with the help that is provided with a sponge with gentle circular movements. Protective composition can be processed in parallel, and plastic/chrome-plated auto parts (headlights, grille, bumper). After that, how was it possible to cover completely the machine the liquid of a glass composition need to give time to that began the process of polymerization - typically, this time period is 45-60 minutes. Despite the simplicity enough, before you apply liquid glass auto, the video, it is advisable to still see it this will help you avoid some errors.

After a time-out, you can get the alignment composition. To do this you need to use wipes from kit. In this case, it is very important not to make chaotic, unsystematic movements. To achieve the best effect of the best to do, for example, the up-down movement, that processes phase by phase. The shield therefore, liquid glass for auto, according to the video feedback and materials provided on the network, and allows you to achieve a stunning shine that will persist for a long time.

THE PRICE IS THE ISSUE: IT IS WORTH IF A NEW METHOD OF YOUR MONEY

THE QUESTION OF THE PRICE IS WELL WORTH IT IF A NEW METHOD OF YOUR MONEY

It is worth to start with which to cover the auto liquid glass best immediately, after its acquisition in the lounge, after periodically update this coverage. In this case, the result will be obvious - bright and shiny, paint coating, as well as a significant reduction in the number of visits to car washes, because the processing of the machine the liquid in the glass gives it excellent properties of hydrophobic - dirt about her delayed considerably smaller.

This coating, such as liquid glass for auto, already has a solid life, of course, will not return pinturay cover the old primeval, but still able to change substantially the appearance of the vehicle and ensure their proper protection. Machine coating liquid to the glass, in this case, has a number of features, the perform-if, of course, can be, but if the lack of professional training, the tell for the durability of the coating is not necessary.

The treatment of the machine the liquid from a glass, of opinions, lets not think about how to save a retouch in a period of, on average, six months to a year and a half, depending on certain conditions of use and climate. Services of specialized centers, where you can cover the auto liquid to glass, of opinions, can cost a amount quite decent, especially if the machine has several scratches and chips to retouch, which must be pre-resolve. However, the enough to see the video self, covered with liquid glass, to understand that the vocational training and the treatment, done by the hands of experts, it is worth the expenditure of funds.

To answer the question, how much does liquid glass to auto or how much it costs to cover the machine from liquid to glass, clearly impossible. It all depends on the manufacturer of the glazes and the amount of future preparatory work. But, in any case, regardless of the current state of retouching, treatment of auto liquid glass has only positive comments. Important not to forget the need for periodic update of this coverage.